Vision 3200W Electric Radiant Heater
Subtle orange glow which is
only 30-40% of the light output
HEATSCOPE® Vision 3200W ambient heater emits medium-wave infrared light with its parallel carbon heating strands. Since the already low luminosity of less than 300 lux is still dimmed by the glass-ceramic front, a cozy atmosphere is created.
Configure & Buy
Buy online and get it delivered to your door.
Key Features
Efficiency Made Simple
HEATSCOPE® is committed to efficiency! All VISION, SPOT and PURE radiant heaters were developed in accordance with the newest findings concerning the mid-wave IR range. This means that between 90% and 94% of the energy used is turned directly into ambient heat.
Real Infrared
All HEATSCOPE® design radiant heaters produce natural infrared heat in the (fast) mid-wave IR range. This means that the heat feels particularly pleasant and is effective exactly where it is needed – that’s directly under the first layers of skin, but not too deep in the tissue.
Inviting & Cosy
Other radiant heaters use light tubes to produce heat as a by-product – at HEATSCOPE® we exclusively use innovative carbon technology: two carbon spirals are powered with an electric current, they begin to glow and produce a particularly pleasant warmth.
Super Fast
Output peaks are a thing of the past with HEATSCOPE® power heaters. Although the heaters start up slowly, they reach 100% in no time: the range of SPOT models take only 15 seconds, and the VISION & PURE range takes a maximum of 30 seconds owing to the glass front.
Award-winning Design
Delivers pleasant heat without the distraction. Clean-cut, modern designs and colours easily blend into any decor.
Weather-Resistant
All models are certified with an IP rating for protection against dust, splash-water, and wind.
No Aggressive Red Light
Produces a very ambient, modest light based on double carbon heating elements.
High Efficiency
Up to 94% of the energy used is turned into ambient heat and transferred directly to nearby people and surfaces for maximum efficiency.
Smart Switch
Operate and sync your heater(s) with your smart device (compatible with Alexa and Google Assistant). *Internet connection and additional accessories required
2-Year Warranty
Our radiant heaters come with an industry leading two-year limited warranty.
Technical Specifications
Installation Height
Power / Current
Voltage
Max. Power In
Radiant Efficiency
Visible Light
Coverage Area
This graphic shows the heating performance of Heatscope Vision 3200W heaters. Please note that the heat output always depends on a wide range of factors.
They include: Installation environment (indoors or outdoors, enclosed or open, wind-protected or wind-prone), installation height, radiation angles, weather, voltage fluctuations, etc.
Please consider all these factors in your planning.
*All values are approximate. Max. temperature increases achievable in enclosed spaces at 16 °C (dependent on the respective installation conditions and mounting height).
Construction
- MPN (Black) MHS-VE3200AB.100
- MPN (White) MHS-VE3200WT.100
- Weight 10kg [22.05lb]
- Model Dimensions mm [in] L 1660 [65.4] W 184 [7.2] H 87 [3.4]
- Application Indoor & Outdoor
- Materials Aluminum body, glass ceramic front
- Colours
Accessories
Includes everything you need to easily operate and protect your investment for many years to come.
FAQ's
View AllAre HEATSCOPE® heaters water resistant?
All HEATSCOPE® VISION and SPOT radiant heaters are protected against dust and splash-water (IP44 and IP24)! In other words: the heaters require additional protection from above/behind against persistent or strong rain, such as a canopy or roof.
In general though a wall projection (or similar) is sufficient. If no rear protection is possible and the heater is to hang completely freely, a HEATSCOPE® weather protection shield is obligatory in all cases.
The weather protection shields are available in black or white and incorporate the shape and curvature of the rear side of the design radiant heater.
In this way, HEATSCOPE® VISION (IP44) and SPOT (IP24) heaters are optimally protected against wind and weather.
Can I control HEATSCOPE® infrared heaters continuously with a standard dimmer?
HEATSCOPE® infrared heaters cannot be controlled with a standard dimmer due to the amount of power required.
HEATSCOPE® VISION and Spot heaters can be controlled with an on/off switch or via an infrared remote control with two switchable power levels, (on/off, 100%, 50%).
Can HEATSCOPE® infrared heaters be mounted directly on a wooden structure?
HEATSCOPE® infrared heaters are sold with our mounting devices called spacers and when used it is absolutely safe to mount the Heatscope heater to the wood supporting structure. Thus, the use of the HEATSCOPE® mounting accessories provides the recommended minimum clearances from combustible material.
What type of heating waves does a HEATSCOPE® radiant heater produce?
Pure and Vision produce medium waves for a very pleasant warmth and minimal light. Spot produces fast medium waves, for quicker heat and a touch of more light.
How long do the dual carbon rods used in Vision and Spot last?
Provided they are installed in accordance with their requirements and instructions, HEATSCOPE® infrared heaters require very little maintenance and their heating elements can have a life of at least 10,000 hours of operation.
Is the radiation emitted by electric infrared heaters dangerous?
No, infrared heaters are a safe source of heat. Infrared heat does not have a high frequency like ultraviolet rays and X-rays, which are known to be dangerous. HEATSCOPE® radiant heaters produce medium to medium-fast waves for a pleasant warmth and minimal light.
Which heater model is the best for me?
This depends on the installation environment. If you own an open terrace, where sometimes the wind is blowing, we highly recommend only the SPOT power heatres.
But if you want to heat your glass house, conservatory or loggia, we entrust the ambient heaters VISION to you. These perfectly match well covered areas.
A rule of thumb is: The more open the area the more open the heater has to be – even if the other model looks nicer and is pleasing you more.
Where is the power connector of HEATSCOPE® infrared heaters located?
The HEATSCOPE® VISION and Spot heaters have the power cable attached to the unit on the right and an on/off switch on the back of the unit.
How Can We
Help?
Step-by-step guidance to find the right solution for your needs, trade professional benefits, and ongoing support before and after your purchase.
Live Chat-
Project Assistance
From product selection, to material sourcing, and project reviews, our team is here to help.
-
Dedicated Support
Our unparalleled support and versatile product range makes designing with fire simpler than ever.
-
1-on-1 Screenshare
Can't make it to our showroom? Book an online consultation with our team of specialists.
-
Business Programs
Smart pricing, personalised support and unparalleled creative freedom.
-
Exclusive Pricing
Enjoy exclusive discounts across our entire range of fireplaces and fire pits.